Ubicación: Global + English
Global Global Algérie Français Algeria English Angola Português Angola English Argentina Español Argentina English Australia English Austria Deutsch Austria English Azerbaijan English Azerbaijan Русский Bahrain English Bangladesh English Belgium English Belgium Français Belgium Nederlands Brazil Português Brazil English Bulgaria български Bulgaria English Cameroon English Cameroon Français Canada English Canada Français Chile Español Chile English China 中文 China 日本語 China English Colombia Español Colombia English Croatia English Czech Republic Čeština Czech Republic English Denmark English Djibouti English Ecuador Español Ecuador English Egypt English Estonia English Ethiopia English Finland Suomi Finland English France Français France English Georgia English Georgia Русский Germany Deutsch Germany English Ghana English Greece Ελληνικά Greece English Guatemala Español Guatemala English Hong Kong, China English Hong Kong, China 中文 Hungary Magyar Hungary English India English Indonesia English Iraq English Ireland English Italy Italiano Italy English Ivory Coast Français Ivory Coast English Japan 日本語 Japan English Jordan English Kazakhstan Русский Kazakhstan English Kenya English Kuwait English Kyrgyzstan Русский Kyrgyzstan English Latvia English Lithuania English Malaysia English Mauritius English Mauritius français (Maurice) Mexico Español Mexico English Moldova Română Moldova English Mongolia English Morocco English Morocco Français Mozambique Português Mozambique English Netherlands Nederlands Netherlands English New Zealand English Nigeria English Norway English Oman English Pakistan English Paraguay Español Paraguay English Peru Español Peru English Philippines English Poland Polski Poland English Portugal Português Portugal English Qatar English Republic of Korea 한국어 Republic of Korea English Romania Română Romania English Saudi Arabia English Serbia Српски Serbia English Singapore English Slovakia English Slovenia English South Africa English Spain English Spain Español Sri Lanka English Sweden English Switzerland Deutsch Switzerland Français Switzerland Italiano Switzerland English Tanzania English Thailand ไทย Thailand English Togo English Togo Français Tunisia English Tunisia Français Türkiye Türkçe Türkiye English Turkmenistan Русский Turkmenistan English Ukraine Українська Ukraine English United Arab Emirates English United Kingdom English Uruguay Español Uruguay English USA English Uzbekistan English Uzbekistan Русский Vietnam Tiếng Việt Vietnam English

Concrete Flexural Strength Testing: Inspection Basis, Standards, and Methods

Concrete flexural strength, also known as the modulus of rupture, is a decisive performance indicator for pavements, slabs, and thin concrete structures subjected to bending stresses. This article presents the authoritative inspection basis for concrete flexural strength testing, covering the governing national and international standards such as GB/T 50081, ASTM C78, EN 12390-5, and ISO 1920-4, together with specimen requirements, testing procedures, calculation methods, and typical acceptance criteria.

Technical Overview

Flexural strength (modulus of rupture) is the ability of a hardened concrete beam specimen to resist failure under bending. It is one of the principal design and quality-control parameters for cement concrete pavements, airfield pavements, industrial floors, and other structures where bending rather than compression governs performance. Because flexural strength is closely related to the tensile capacity of the concrete matrix and the bond between paste and aggregate, it is highly sensitive to mixture proportioning, water-cement ratio, curing quality, and aggregate characteristics.

The inspection of concrete flexural strength must be carried out in accordance with recognized national and international test standards. The principal inspection basis includes:

  • GB/T 50081, Standard for Test Methods of Concrete Physical and Mechanical Properties (China), which specifies beam bending tests with third-point loading.
  • JTG 3420, Test Methods of Materials for Highway Engineering (China), used for flexural strength acceptance of highway cement concrete pavements.
  • ASTM C78/C78M, Standard Test Method for Flexural Strength of Concrete (Using Simple Beam with Third-Point Loading).
  • ASTM C293/C293M, Standard Test Method for Flexural Strength of Concrete (Using Simple Beam with Center-Point Loading).
  • EN 12390-5, Testing Hardened Concrete — Part 5: Flexural Strength of Test Specimens.
  • ISO 1920-4, Testing of Concrete — Part 4: Strength of Hardened Concrete — Flexural Strength.
  • JIS A 1106, Method of Test for Flexural Strength of Concrete.

For pavement engineering, the design codes such as JTG D40 (Specifications for Design of Highway Cement Concrete Pavement) and the corresponding construction acceptance specifications define flexural strength as the governing design indicator, typically evaluated at 28 days of age. Accredited third-party laboratories routinely perform these tests for compliance verification and mix design validation.

Testing Samples

Standard Beam Specimens

Under GB/T 50081 and comparable standards, the standard specimen is a prismatic beam of 150 mm × 150 mm cross-section with a length of 550 mm to 600 mm. Under EN 12390-5 and ISO 1920-4, beams of 100 mm × 100 mm × 500 mm or 150 mm × 150 mm × 750 mm are commonly used. ASTM C78 specifies a beam of approximately 152 mm × 152 mm × 508 mm. The beam is cast with the long axis horizontal and tested with the loading applied to the surface that was uppermost during molding, unless otherwise specified.

Non-Standard Specimens and Size Conversion

When the maximum aggregate size does not exceed 31.5 mm, smaller beams of 100 mm × 100 mm × 400 mm may be used as non-standard specimens. Results obtained on 100 mm beams must be converted to the equivalent standard-specimen strength by applying a conversion factor of 0.85 in accordance with GB/T 50081. Laboratory comparisons should always state the specimen geometry, because flexural strength results exhibit a measurable size effect.

Sampling, Curing, and Conditioning

  • Beams shall be sampled from the same concrete batch as the structural placement or trial mixture, following the sampling provisions of the applicable standard (for example, GB/T 50080 or EN 12350-1).
  • Specimens are demolded after 24 hours and cured in a standard moist room or water bath at 20 ± 2 °C with relative humidity not lower than 95 percent.
  • The test age is normally 28 days, although 7-day and 56-day results may be specified for early-strength evaluation or supplementary cementitious material mixtures.
  • Immediately before testing, specimens are wiped to a saturated surface-dry condition and their width and depth are measured at mid-span to the accuracy required by the standard.

Testing Items

The core testing item is the flexural strength (modulus of rupture) of hardened concrete at the specified age, expressed in megapascals (MPa) to the nearest 0.01 or 0.1 MPa depending on the standard. Related testing items frequently commissioned together include:

  • Compressive strength of companion cubes or cylinders for verifying the flexural-to-compressive strength relationship of a mixture.
  • Static modulus of elasticity where deflection or stress analysis of the pavement slab is required.
  • Dry density or unit weight of the beam specimen as an auxiliary conformity check.
  • Repeated flexural testing at multiple ages to establish strength development curves for construction scheduling such as opening traffic lanes.

Testing Methods

Third-Point Loading Method

The third-point loading configuration, specified by GB/T 50081, ASTM C78, and EN 12390-5, is the reference method for pavement concrete. The beam is supported on two rollers with a span equal to three times the specimen depth (450 mm for a 150 mm beam), and the load is applied symmetrically through two loading rollers located at the third points of the span. This configuration produces a constant maximum bending moment in the middle third of the span, so the result reflects the average strength of the material rather than a single weak section.

Center-Point Loading Method

The center-point configuration described in ASTM C293 applies a single concentrated load at mid-span. It is simpler and faster, but the maximum bending moment is concentrated at one cross-section, so the measured strength is typically 10 to 15 percent higher and more variable than third-point results. Center-point values must not be interchanged with third-point values without documented correlation.

Loading Rate and Procedure

  • GB/T 50081 requires a continuous and uniform loading rate of 0.05 to 0.08 MPa/s in terms of stress at the extreme fiber until failure.
  • ASTM C78 requires loading at a rate that constantly increases the extreme fiber stress within approximately 0.9 to 1.2 MPa per minute.
  • The failure load is recorded, together with the exact location of the fracture in relation to the middle third of the span.

Calculation and Validity Rules

When the fracture occurs within the middle third of the span, the flexural strength is calculated as f = F × L / (b × h²), where P is the failure load, L is the span length, b is the average width, and h is the average depth of the specimen. If the fracture occurs outside the middle third but within five percent of the span, GB/T 50081 permits the result to be accepted with a modified calculation based on the actual fracture distance; a fracture occurring farther outside the middle third invalidates the test, and the specimen is retested. The reported strength is normally the average of three companion beams tested at the same age.

Applications

Flexural strength testing serves as the primary acceptance basis wherever concrete performs as a slab-on-grade or pavement layer:

  • Highway cement concrete pavements, where design codes require a 28-day design flexural strength commonly in the range of 4.0 to 5.5 MPa depending on traffic classification.
  • Airport runways, taxiways, and aprons, where high flexural capacity is essential for aircraft wheel loads.
  • Industrial floors, warehouse slabs, and parking decks subject to concentrated loads and curling stresses.
  • Bridge deck overlays and thin bonded wearing courses where bending governs the service behavior.
  • Evaluation of steel-fiber or macro-synthetic-fiber-reinforced concrete, where residual flexural strength characterizes post-cracking performance.
  • Mix proportioning optimization and construction quality verification performed by accredited third-party laboratories and on-site project laboratories.

FAQ

What is the difference between flexural strength and compressive strength?

Compressive strength measures resistance to crushing and is the general structural acceptance parameter, while flexural strength measures resistance to bending and cracking, which is roughly 10 to 20 percent of the compressive strength. Pavement design is governed by flexural strength because a pavement slab behaves like a plate loaded in bending. An empirical relation of approximately f(flexural) = 0.6 to 0.75 times the square root of f(cylinder) in MPa is often used for estimation, but acceptance must rely on direct beam tests.

Why is third-point loading the reference method?

Third-point loading creates a region of constant maximum moment between the loading points, so the fracture is likely to occur at the weakest point within a substantial zone of the beam. This yields a statistically more representative and less variable measure of the concrete quality than center-point loading.

Can results from 100 mm beams be compared with 150 mm beams?

Not directly. Due to the size effect and the higher brittleness of smaller sections, 100 mm beams produce higher apparent flexural strength. Under GB/T 50081, the 100 mm result is multiplied by a conversion factor of 0.85 to obtain the equivalent standard value, and only converted values may be used for compliance judgment.

What happens if the beam breaks outside the middle third?

If the fracture occurs outside the middle third but within five percent of the span measured from the loading point, the result may be retained with a corrected calculation; otherwise the specimen result is discarded and the test is repeated. This rule is stated explicitly in GB/T 50081 and has equivalents in ASTM C78.

How many beams are required for one acceptance test?

Most specifications require three beam specimens per batch or per placement section, tested at the specified age, with the mean value compared against the design flexural strength. Statistical acceptance criteria for highway pavement construction additionally consider the coefficient of variation and the minimum individual result in accordance with the applicable construction quality inspection and acceptance standard.

Why Choose ZKGX?

  • State-of-the-art analytical equipment
  • Highly qualified scientific team
  • Fast turnaround time
  • Competitive pricing