Ubicación: Global + English
Global Global Algérie Français Algeria English Angola Português Angola English Argentina Español Argentina English Australia English Austria Deutsch Austria English Azerbaijan English Azerbaijan Русский Bahrain English Bangladesh English Belgium English Belgium Français Belgium Nederlands Brazil Português Brazil English Bulgaria български Bulgaria English Cameroon English Cameroon Français Canada English Canada Français Chile Español Chile English China 中文 China 日本語 China English Colombia Español Colombia English Croatia English Czech Republic Čeština Czech Republic English Denmark English Djibouti English Ecuador Español Ecuador English Egypt English Estonia English Ethiopia English Finland Suomi Finland English France Français France English Georgia English Georgia Русский Germany Deutsch Germany English Ghana English Greece Ελληνικά Greece English Guatemala Español Guatemala English Hong Kong, China English Hong Kong, China 中文 Hungary Magyar Hungary English India English Indonesia English Iraq English Ireland English Italy Italiano Italy English Ivory Coast Français Ivory Coast English Japan 日本語 Japan English Jordan English Kazakhstan Русский Kazakhstan English Kenya English Kuwait English Kyrgyzstan Русский Kyrgyzstan English Latvia English Lithuania English Malaysia English Mauritius English Mauritius français (Maurice) Mexico Español Mexico English Moldova Română Moldova English Mongolia English Morocco English Morocco Français Mozambique Português Mozambique English Netherlands Nederlands Netherlands English New Zealand English Nigeria English Norway English Oman English Pakistan English Paraguay Español Paraguay English Peru Español Peru English Philippines English Poland Polski Poland English Portugal Português Portugal English Qatar English Republic of Korea 한국어 Republic of Korea English Romania Română Romania English Saudi Arabia English Serbia Српски Serbia English Singapore English Slovakia English Slovenia English South Africa English Spain English Spain Español Sri Lanka English Sweden English Switzerland Deutsch Switzerland Français Switzerland Italiano Switzerland English Tanzania English Thailand ไทย Thailand English Togo English Togo Français Tunisia English Tunisia Français Türkiye Türkçe Türkiye English Turkmenistan Русский Turkmenistan English Ukraine Українська Ukraine English United Arab Emirates English United Kingdom English Uruguay Español Uruguay English USA English Uzbekistan English Uzbekistan Русский Vietnam Tiếng Việt Vietnam English

ISO Test Methods for the Hiding Power of Paints and Coatings: A Technical Guide to ISO 6504-1, ISO 6

Hiding power, also known as opacity or covering power, is one of the most critical performance attributes of paints and coatings, determining how effectively an applied film conceals the color and color differences of the substrate. This technical article explains the ISO test methods for coating hiding power, including ISO 6504-1 (Kubelka-Munk method), ISO 6504-3 (contrast ratio method) and ISO 2814 (comparative method), covering test principles, instrumentation, sample requirements, calculation procedures and typical industrial applications. The guide is intended for coating formulators, quality-control engineers and technical staff at accredited third-party laboratories.

Technical Overview

Hiding power (opacity) is defined as the ability of a coating, applied at a specified film thickness or spreading rate, to obscure the color or color differences of the substrate beneath it. It is a decisive quality characteristic for virtually all pigmented coatings and is governed primarily by the light-scattering efficiency of the pigment system (typically titanium dioxide in white and tinted paints), the pigment volume concentration, the absorption behavior of colored pigments, and the applied dry film thickness.

The core ISO framework for measuring hiding power consists of the ISO 6504 series and ISO 2814. ISO 6504-1 specifies the Kubelka-Munk method for white and light-colored paints and reports hiding power as the spreading rate (m²/L) required to achieve a contrast ratio of 98%, which is internationally accepted as the threshold of practical full hiding. ISO 6504-3 specifies a contrast-ratio method that is applicable to pigmented coatings of any color, including deep and dark shades for which the Kubelka-Munk procedure of Part 1 is not valid. ISO 2814 describes a comparative method for evaluating the contrast ratio of paints of the same type and color against an agreed reference material. In the Chinese standards system, GB/T 13452.3 adopts the same Kubelka-Munk principle, while North American practice commonly references ASTM D2805 (hiding power by reflectometry) and ASTM D344 (relative hiding power by visual evaluation). All of these procedures are routinely performed by accredited third-party laboratories operating under ISO/IEC 17025 quality management systems.

The fundamental measurand in all of these methods is the contrast ratio (CR), calculated as CR = 100 × Rb/Rw, where Rb is the reflectance of the applied film measured over a black backing and Rw is the reflectance measured over a white backing. Because a perfectly opaque film renders the black and white backgrounds indistinguishable, a contrast ratio approaching 100% indicates complete hiding.

Testing Samples

Waterborne Architectural Coatings

Interior and exterior emulsion paints, wall primers and flat, eggshell and satin decorative coatings are the most frequently tested category. A representative sample of typically 0.5 L (minimum 200 mL) is sufficient for drawdowns at multiple film thicknesses with replication. The sample must be homogenized by careful stirring without entraining air, and any dilution must follow the manufacturer's specified application conditions.

Solvent-Borne and Industrial Coatings

Alkyd enamels, anticorrosive primers, two-component polyurethane systems and stoving enamels can also be evaluated. For reactive systems, the sample must be mixed in the correct ratio and tested within the applicable pot-life window. Curing schedules (time, temperature, humidity) must replicate the intended field or baking conditions, since opacity after full cure can differ measurably from wet or early-dry opacity.

Sample Conditioning and Supplementary Data

All samples, substrates and application tools are conditioned to the standard atmosphere of 23 ± 2 °C and 50 ± 5% relative humidity in accordance with ISO 3270 before testing. In addition, the paint density (ISO 2811) and nonvolatile content (ISO 3251) are determined, because the dry film thickness of each drawdown is derived gravimetrically from the applied mass, the solids content, the density and the coated area.

Testing Items

Depending on the selected ISO procedure and the product specification, the following parameters are typically reported from a hiding power evaluation:

  • Contrast ratio (CR, in %) at a specified wet film thickness, dry film thickness or spreading rate.
  • Hiding power expressed as the spreading rate (m²/L) at which a contrast ratio of 98% is achieved, determined by the Kubelka-Munk method of ISO 6504-1.
  • Dry film thickness corresponding to full hiding, and the associated paint consumption in g/m².
  • Scattering coefficient (S) and absorption coefficient (K), or the K/S ratio, derived from Kubelka-Munk data for formulation studies.
  • Relative hiding power of a test paint compared with a reference paint of the same type and color in accordance with ISO 2814.
  • Change of opacity between the wet state and the dry state, which is a useful diagnostic for open-time and film-formation behavior.

Testing Methods

ISO 6504-1: Kubelka-Munk Method for White and Light-Colored Paints

ISO 6504-1 is the reference method for determining the hiding power of white and light-colored, air-drying paints. It is based on the two-constant Kubelka-Munk theory, which relates the reflectance of a film to its absorption coefficient K, its scattering coefficient S and its thickness. The reflectance of an infinitely thick layer is described by R∞ = 1 + K/S − [(K/S)² + 2K/S]^0.5, and from measurements on films of finite thickness the scattering behavior can be extrapolated to any required contrast ratio. The standard procedure comprises the following steps:

  • Condition the paint, substrate and applicator to 23 ± 2 °C and 50 ± 5% relative humidity.
  • Prepare drawdowns at a minimum of three (typically three to five) different wet film thicknesses, for example 75, 100, 150 and 200 μm, using a calibrated film applicator on glass plates or clear polyester film, ensuring that the resulting contrast ratios bracket the target value of 98%.
  • Dry or cure the films under the conditions specified for the product, then re-condition them in the standard atmosphere.
  • Determine the luminance factor Y (or equivalent reflectance) of each film over a black backing (Rb) and over a white backing (Rw) using a calibrated reflectometer or spectrophotometer.
  • Calculate the contrast ratio CR = 100 × Rb/Rw for each film.
  • Determine the dry film thickness of each drawdown by the mass-area method, using the applied mass, the nonvolatile content, the paint density and the coated area.
  • Compute the Kubelka-Munk scattering coefficient and derive, by calculation or graphical interpolation, the spreading rate in m²/L at which the contrast ratio reaches 98%.
  • Report the hiding power as the CR98 spreading rate, together with the test conditions, drying schedule and measurement geometry.

ISO 6504-3: Contrast Ratio Method for Pigmented Coatings

ISO 6504-3 extends hiding power evaluation to non-white and strongly colored paints. The coating is applied at one or more specified film thicknesses onto black-and-white contrast charts using a film applicator, dried under defined conditions, and the reflectance over the black and white regions is measured instrumentally. The result is reported as the contrast ratio (%) at the applied thickness or spreading rate, and acceptance is judged against the minimum value agreed in the product specification. When drawdowns are made at several thicknesses, the thickness or spreading rate required to reach a defined contrast ratio can also be interpolated. This method is the practical standard for deep-shade architectural and industrial coatings.

ISO 2814: Comparative Contrast Ratio Method

ISO 2814 provides a comparative procedure in which the test paint and an agreed reference paint of the same type and color are applied side by side, at the same spreading rate, on black-and-white contrast charts. After drying, the contrast ratios are compared either visually by a trained observer or instrumentally with a reflectometer, and the relative hiding power of the test paint is reported. Although this method has largely been superseded by the absolute methods of the ISO 6504 series, it remains useful for quick supplier comparisons, qualification trials and dispute resolution.

Equipment and Measurement Conditions

All three methods rely on comparable instrumentation: a spectrophotometer or tristimulus colorimeter (typically with d/8 or 45/0 geometry, calibrated with certified white and black standards), precision film applicators with defined gap depths, an analytical balance with 1 mg resolution for gravimetric thickness determination, black-and-white contrast charts of defined reflectance, and controlled drying and conditioning facilities. Consistent application technique, freedom from bubbles, streaks and contamination, and strict adherence to the specified drying schedule are essential, because film thickness and film formation are the dominant sources of measurement variability.

Applications

Hiding power testing according to the ISO 6504 series and ISO 2814 supports a wide range of technical and commercial objectives across the coatings industry:

  • Batch quality control and release testing for architectural emulsion paints and enamels against internal or contractual minimum opacity limits.
  • Classification of interior wall paints, for example under EN 13300, which grades products according to covering power together with gloss and wet-scrub resistance.
  • Evidence of opacity performance for environmental labeling schemes and green procurement requirements, where minimum spreading rates at full hiding help reduce total paint consumption per project.
  • Formulation optimization, particularly the economical use of titanium dioxide, the evaluation of extenders and voided-scattering pigments, and the development of low-VOC waterborne systems whose hiding behavior changes during film coalescence.
  • Comparative product claims, supplier qualification and incoming inspection of raw materials or tinting systems.
  • Research and development studies linking pigment volume concentration, particle size distribution and binder refractive index to optical efficiency.
  • Technical support in dispute resolution, where measurements by accredited third-party laboratories provide independent, traceable opacity data.

FAQ

  • Q: What is the difference between hiding power, opacity and contrast ratio? A: Hiding power and opacity are synonymous performance properties; the contrast ratio is the quantitative instrument measurand (100 × Rb/Rw) used to express them. A contrast ratio of 100% means the substrate is completely hidden.
  • Q: Why is 98% contrast ratio used as the definition of full hiding? A: Experience shows that above approximately 98% the human eye can no longer distinguish the underlying black and white pattern, so 98% CR is the internationally agreed practical threshold of complete hiding, and ISO 6504-1 reports the spreading rate needed to reach exactly this value.
  • Q: Which method should be used for dark or saturated colors? A: The Kubelka-Munk method of ISO 6504-1 is restricted to white and light-colored paints; for colored and dark coatings, ISO 6504-3, which measures the contrast ratio at a defined film thickness, is the appropriate procedure.
  • Q: How is the dry film thickness determined without destroying the film? A: The gravimetric mass-area method is used: the mass of paint applied to a known area, corrected for nonvolatile content and density, yields the dry film thickness, avoiding any contact measurement that could deform the film.
  • Q: How many drawdowns are required? A: ISO 6504-1 requires films at a minimum of three different thicknesses so that the contrast-ratio-versus-spreading-rate curve can be established and the 98% point interpolated with confidence.
  • Q: Does wet hiding equal dry hiding? A: Not always. During drying, the replacement of water or solvent by binder changes the pigment surrounding medium and typically increases opacity; differences are most pronounced in waterborne and low-VOC systems.
  • Q: What are the main sources of measurement uncertainty? A: Application uniformity, accuracy of the applied wet film thickness, correct drying and conditioning, instrument calibration against certified white and black standards, and precise determination of paint density and nonvolatile content.
  • Q: How do the ISO methods relate to other national standards? A: GB/T 13452.3 adopts the Kubelka-Munk principle in the Chinese system, while ASTM D2805 provides an equivalent reflectometric hiding power method and ASTM D344 a visual comparative method; results correlate closely when film thickness and drying conditions are matched.

Why Choose ZKGX?

  • State-of-the-art analytical equipment
  • Highly qualified scientific team
  • Fast turnaround time
  • Competitive pricing