Ubicación: Global + English
Global Global Algérie Français Algeria English Angola Português Angola English Argentina Español Argentina English Australia English Austria Deutsch Austria English Azerbaijan English Azerbaijan Русский Bahrain English Bangladesh English Belgium English Belgium Français Belgium Nederlands Brazil Português Brazil English Bulgaria български Bulgaria English Cameroon English Cameroon Français Canada English Canada Français Chile Español Chile English China 中文 China 日本語 China English Colombia Español Colombia English Croatia English Czech Republic Čeština Czech Republic English Denmark English Djibouti English Ecuador Español Ecuador English Egypt English Estonia English Ethiopia English Finland Suomi Finland English France Français France English Georgia English Georgia Русский Germany Deutsch Germany English Ghana English Greece Ελληνικά Greece English Guatemala Español Guatemala English Hong Kong, China English Hong Kong, China 中文 Hungary Magyar Hungary English India English Indonesia English Iraq English Ireland English Italy Italiano Italy English Ivory Coast Français Ivory Coast English Japan 日本語 Japan English Jordan English Kazakhstan Русский Kazakhstan English Kenya English Kuwait English Kyrgyzstan Русский Kyrgyzstan English Latvia English Lithuania English Malaysia English Mauritius English Mauritius français (Maurice) Mexico Español Mexico English Moldova Română Moldova English Mongolia English Morocco English Morocco Français Mozambique Português Mozambique English Netherlands Nederlands Netherlands English New Zealand English Nigeria English Norway English Oman English Pakistan English Paraguay Español Paraguay English Peru Español Peru English Philippines English Poland Polski Poland English Portugal Português Portugal English Qatar English Republic of Korea 한국어 Republic of Korea English Romania Română Romania English Saudi Arabia English Serbia Српски Serbia English Singapore English Slovakia English Slovenia English South Africa English Spain English Spain Español Sri Lanka English Sweden English Switzerland Deutsch Switzerland Français Switzerland Italiano Switzerland English Tanzania English Thailand ไทย Thailand English Togo English Togo Français Tunisia English Tunisia Français Türkiye Türkçe Türkiye English Turkmenistan Русский Turkmenistan English Ukraine Українська Ukraine English United Arab Emirates English United Kingdom English Uruguay Español Uruguay English USA English Uzbekistan English Uzbekistan Русский Vietnam Tiếng Việt Vietnam English

Determination of Nitrogen Concentration in Nitrided Layers: Testing Methods, Standards, and Applicat

Nitrogen concentration determination in nitrided layers is a specialized materials testing service that quantifies the nitrogen content and depth distribution introduced by gas, plasma, or salt-bath nitriding treatments. Accurate measurement of the nitrogen profile is essential for verifying case depth, compound layer composition, surface hardness, and corrosion resistance in accordance with ISO 15787, GB/T 11354, and ASTM E1019. Accredited third-party laboratories apply advanced analytical techniques such as electron probe microanalysis, glow discharge optical emission spectroscopy, and inert gas fusion analysis to deliver reliable, standards-based results for quality control and process optimization.

Technical Overview

Nitriding is a thermochemical surface hardening process in which atomic nitrogen is introduced into the surface of a metallic component at temperatures typically between 500 °C and 580 °C. The process produces a compound layer (also called the white layer) composed of iron nitrides such as gamma-prime Fe4N and epsilon Fe2-3N, followed by a diffusion zone in which nitrogen is dissolved in the ferritic matrix or precipitated as fine alloy nitrides. The nitrogen concentration at the surface and its gradient with depth directly govern the hardness profile, effective case depth, residual stress state, wear resistance, and corrosion behavior of the treated part.

Determining nitrogen concentration in a nitrided layer is analytically demanding because nitrogen is a light element present in a shallow region, often less than one millimeter thick, and frequently at concentration levels of only a few weight percent. Quantification therefore requires surface-sensitive microanalytical techniques with high depth resolution and low detection limits. National and international standards, including ISO 15787 for the characterization of nitrided layers, GB/T 11354 for nitrided case depth and brittleness evaluation, and ASTM E1019 for nitrogen determination by inert gas fusion, provide the framework for standardized sampling, measurement, and reporting. Accredited third-party laboratories combine these methods with rigorous metallographic preparation to ensure traceable and reproducible results.

Testing Samples

Specimens submitted for nitrided layer nitrogen concentration determination cover a wide range of engineering materials and component geometries. Both witness coupons processed alongside production loads and actual finished parts can be evaluated.

Carbon and Alloy Structural Steels

Common substrate materials include plain carbon steels and nitriding alloy steels such as 42CrMo4, 40Cr, and the classical nitriding steel 38CrMoAl, in which aluminum, chromium, and molybdenum promote the formation of hard, stable nitrides.

Tool and Die Steels

Hot-work and cold-work tool steels such as H13, D2, SKD61, and M2 are routinely nitrided for die casting dies, forging tools, and plastic molds, and require verification of surface nitrogen pickup and case uniformity.

Stainless Steels

Austenitic grades such as 304 and 316, precipitation hardening grades such as 17-4PH, and duplex stainless steels are solution or plasma nitrided to create expanded austenite or nitride layers, where nitrogen levels can exceed 10 at.% and must be profiled with high spatial resolution.

Cast Irons and Non-Ferrous Alloys

Nodular and gray cast irons, as well as titanium alloys such as Ti-6Al-4V, are also nitrided for wear protection, and their nitrogen profiles may require adapted calibration and surface preparation.

Finished Components

Representative production parts include crankshafts, camshafts, gears, valve seats and guides, fuel injection components, extruder screws, hydraulic rods, and turbine parts, which can be sectioned or tested on flat accessible surfaces.

Testing Items

Typical measurement deliverables for nitrogen concentration determination in nitrided layers include:

  • Surface nitrogen concentration expressed in weight percent or atomic percent, measured at defined depths below the surface.
  • Complete nitrogen concentration depth profile from the surface into the unaffected core material.
  • Nitrided case depth determined from the concentration profile, commonly defined as the depth at which nitrogen falls to a specified limit or to 50 % above the core nitrogen level.
  • Compound layer nitrogen content and thickness, correlating with phase constitution (gamma-prime or epsilon nitrides).
  • Effective hardening depth derived from microhardness traverses per GB/T 11354 and ISO 15787, used in conjunction with concentration data.
  • Total nitrogen mass per unit area (mg/dm2) for process control of nitriding potential and cycle reproducibility.
  • Homogeneity assessment across multiple locations on a part or among several parts from the same batch.

Testing Methods

Several complementary analytical techniques are available, and the selection depends on the required spatial resolution, detection limit, and specimen geometry.

Electron Probe Microanalysis (EPMA-WDS)

EPMA with wavelength dispersive spectrometry is the reference method for quantitative point analysis and line-scan profiling of nitrogen on metallographically polished cross sections. Spatial resolution in the range of one to three micrometers allows the compound layer and diffusion zone to be profiled point by point, with matrix-matched nitride standards ensuring accuracy at concentration levels from a few tenths of a weight percent to more than 10 weight percent.

Glow Discharge Optical Emission Spectroscopy (GDOES)

is not a tag — ignore, write properly:

Glow discharge optical emission spectroscopy provides rapid depth profiling by sputter-removing material layer by layer while continuously recording emission intensities. Calibration with certified reference materials converts intensity into quantitative nitrogen concentration as a function of depth, making GDOES particularly effective for quality control of flat samples and for profiling nitrided stainless steels with expanded austenite layers.

Inert Gas Fusion Analysis (ASTM E1019) with Layer Removal

Bulk nitrogen determination by inert gas fusion, in which the sample is fused in a graphite crucible under a helium or argon atmosphere and released nitrogen is measured by thermal conductivity or infrared detection, offers high accuracy for total nitrogen content. By combining incremental material removal, through precision grinding or turning of known thickness steps, with successive fusion analyses, an average nitrogen concentration for each layer can be reconstructed into a depth profile.

Secondary Ion Mass Spectrometry (SIMS)

SIMS delivers the highest depth resolution and lowest detection limits, reaching parts-per-million sensitivity for nitrogen. It is applied in research and failure analysis contexts, for example to characterize ultra-thin nitrided layers, nitrogen segregation, or gradients in advanced alloys where sub-micrometer resolution is required.

Complementary Metallographic and Hardness-Based Evaluation

Microhardness traverses per GB/T 11354 and ISO 15787 using loads such as HV0.5 or HV1, together with metallographic etching and microstructural examination, provide an indirect but standardized assessment of case depth and layer integrity. X-ray diffraction (XRD) complements the chemical data by identifying the nitride phases present and quantifying residual stresses, allowing full correlation between nitrogen concentration, phase constitution, and mechanical performance.

Applications

Nitrogen concentration determination of nitrided layers supports a broad spectrum of industrial and research needs:

  • Automotive powertrain components such as crankshafts, camshafts, gears, and fuel injector parts, where fatigue life and scuffing resistance depend on a controlled case nitrogen profile.
  • Die casting, forging, and plastic injection molds in H13 and similar tool steels, where excessive compound layer nitrogen can cause spalling while insufficient nitrogen reduces service life.
  • Aerospace and precision machinery parts, including actuator components and bearings, requiring traceable documentation of case depth and surface chemistry.
  • Oil and gas, marine, and chemical processing equipment, where nitrided layers must resist corrosion and adhesive wear in aggressive environments.
  • Heat treatment process development and qualification, including nitriding potential control in gas nitriding, plasma parameter optimization, and batch-to-batch statistical process control.
  • Failure analysis and vendor audits, where measured nitrogen profiles are compared against drawing specifications and process records.

In all cases, results are reported with clear sampling locations, measurement uncertainty, applicable standards, and interpretation support from materials engineers.

FAQ

What nitrogen concentration is typical at the surface of a gas-nitrided steel?

For alloy steels, surface nitrogen content in the compound layer typically ranges from about 5 to 9 weight percent, corresponding to gamma-prime or epsilon iron nitrides, while the diffusion zone shows a decreasing gradient from roughly 1 weight percent near the interface to core levels. Solution-nitrided stainless steels can exhibit local nitrogen levels above 10 atomic percent in expanded austenite.

How is nitrided case depth defined when using concentration profiles?

Case depth from concentration data is commonly defined as the depth at which the nitrogen content falls to a specified threshold, or to 50 % above the measured core nitrogen level. This concentration-based depth is cross-checked against the hardness-based effective case depth measured per GB/T 11354 and ISO 15787.

Which technique is best suited to my sample?

EPMA is preferred for cross sections requiring localized quantitative point analysis, GDOES for fast high-resolution depth profiling of flat coupons, inert gas fusion per ASTM E1019 for accurate total nitrogen with layer removal, and SIMS for ultra-thin layers or trace-level studies. Laboratory engineers recommend the optimal method based on geometry, layer thickness, and the required detection limit.

What sample preparation is required?

Cross-sectional specimens must be mounted and polished without introducing edge rounding or smearing that would distort near-surface readings; nickel plating or edge retention mounting is often applied. For GDOES and fusion methods, surfaces must be flat, clean, and free of oils, oxides, or residual salts from the nitriding process.

What standards govern this testing?

Key references include ISO 15787 for characterization of nitrided layers, GB/T 11354 for nitrided case depth and brittleness rating, ASTM E1019 for nitrogen by inert gas fusion, and related microhardness standards such as ISO 6507 and ASTM E384 supporting hardness-based case depth evaluation.

How should results be interpreted for acceptance?

Measured nitrogen concentration and case depth values are compared against component drawings, customer specifications, or process qualification limits. Consistency between the concentration profile, hardness traverse, phase identification, and microstructure provides the strongest basis for acceptance, and accredited third-party laboratories issue test reports suitable for supplier audits and certification purposes.

Why Choose ZKGX?

  • State-of-the-art analytical equipment
  • Highly qualified scientific team
  • Fast turnaround time
  • Competitive pricing