Ubicación: Global + English
Global Global Algérie Français Algeria English Angola Português Angola English Argentina Español Argentina English Australia English Austria Deutsch Austria English Azerbaijan English Azerbaijan Русский Bahrain English Bangladesh English Belgium English Belgium Français Belgium Nederlands Brazil Português Brazil English Bulgaria български Bulgaria English Cameroon English Cameroon Français Canada English Canada Français Chile Español Chile English China 中文 China 日本語 China English Colombia Español Colombia English Croatia English Czech Republic Čeština Czech Republic English Denmark English Djibouti English Ecuador Español Ecuador English Egypt English Estonia English Ethiopia English Finland Suomi Finland English France Français France English Georgia English Georgia Русский Germany Deutsch Germany English Ghana English Greece Ελληνικά Greece English Guatemala Español Guatemala English Hong Kong, China English Hong Kong, China 中文 Hungary Magyar Hungary English India English Indonesia English Iraq English Ireland English Italy Italiano Italy English Ivory Coast Français Ivory Coast English Japan 日本語 Japan English Jordan English Kazakhstan Русский Kazakhstan English Kenya English Kuwait English Kyrgyzstan Русский Kyrgyzstan English Latvia English Lithuania English Malaysia English Mauritius English Mauritius français (Maurice) Mexico Español Mexico English Moldova Română Moldova English Mongolia English Morocco English Morocco Français Mozambique Português Mozambique English Netherlands Nederlands Netherlands English New Zealand English Nigeria English Norway English Oman English Pakistan English Paraguay Español Paraguay English Peru Español Peru English Philippines English Poland Polski Poland English Portugal Português Portugal English Qatar English Republic of Korea 한국어 Republic of Korea English Romania Română Romania English Saudi Arabia English Serbia Српски Serbia English Singapore English Slovakia English Slovenia English South Africa English Spain English Spain Español Sri Lanka English Sweden English Switzerland Deutsch Switzerland Français Switzerland Italiano Switzerland English Tanzania English Thailand ไทย Thailand English Togo English Togo Français Tunisia English Tunisia Français Türkiye Türkçe Türkiye English Turkmenistan Русский Turkmenistan English Ukraine Українська Ukraine English United Arab Emirates English United Kingdom English Uruguay Español Uruguay English USA English Uzbekistan English Uzbekistan Русский Vietnam Tiếng Việt Vietnam English

Coal Washability Evaluation Testing: Float-and-Sink Analysis, Methods, and Applications

Coal washability evaluation testing determines how effectively raw coal can be upgraded by density-based separation processes, providing the essential data for coal preparation plant design and clean coal yield prediction. Through standardized float-and-sink analysis and washability curve construction, this testing classifies coal by separation difficulty and guides equipment selection, process optimization, and quality control. Accredited third-party laboratories perform these evaluations in accordance with recognized standards such as GB/T 16417, GB/T 478, ISO 7936, and ASTM D4371.

Technical Overview

Coal washability evaluation testing () is a fundamental laboratory procedure used to assess the technical feasibility and economic potential of upgrading raw coal through physical separation. Because coal is a heterogeneous mixture of organic matter (macerals), mineral matter, and associated rock, particles of different composition exhibit different relative densities. Washability testing exploits this density contrast by separating a representative coal sample into a series of density fractions and determining the quality—typically ash content—of each fraction.

The results are used to construct washability curves, which graphically describe the relationship between separation density, clean coal yield, and product ash. Based on the distribution of material near the chosen separation density (the δ±0.1 content, or near-density material), the coal is classified into washability grades ranging from extremely easy to extremely difficult. This classification directly influences the selection of separation equipment, the prediction of plant performance, and the economic appraisal of coal deposits.

In China, washability evaluation is governed by GB/T 16417 (Method for evaluation of washability of coal), while float-and-sink testing procedures are specified in GB/T 478. Internationally comparable methods include ISO 7936 (Hard coal — Evaluation of washability based on float-and-sink testing) and ASTM D4371 (Standard Test Method for Determining the Washability Characteristics of Coal). These standards ensure that results are reproducible and comparable across laboratories and projects.

Testing Samples

Run-of-Mine (ROM) Raw Coal

Representative samples taken from working faces, stockpiles, or feed streams. ROM samples are typically crushed and screened into defined size ranges (for example, 50–25 mm, 25–13 mm, 13–6 mm, 6–3 mm, and 3–0.5 mm) to reflect the size-consist entering a preparation plant. Sample preparation follows GB/T 474 or ISO 18283 to preserve representativeness.

Sized Coal Products

Intermediate products, screened fractions, or blended streams from existing plants may be tested to evaluate further upgrading potential or to diagnose separation inefficiencies in current operations.

Fine Coal and Slime (Below 0.5 mm)

Fine coal cannot be reliably evaluated by density methods alone. Instead, flotation-based evaluation tests (such as release or timed-release flotation tests per GB/T 4757) are used to characterize the floatability of fine particles and to determine achievable ash-yield relationships for flotation circuits.

Testing Items

A complete washability evaluation typically includes the following determinations:

  • Float-and-sink (density fractionation) analysis across standard density intervals, commonly <1.30, 1.30–1.40, 1.40–1.50, 1.50–1.60, 1.60–1.70, 1.70–1.80, 1.80–2.00, and >2.00 kg/L.
  • Yield (mass percentage) of each density fraction on a dry basis.
  • Ash content of each density fraction and the cumulative weighted ash of floats and sinks, determined per GB/T 212 or ISO 1171.
  • Total sulfur and, where required, forms of sulfur for individual density fractions (GB/T 214 / ISO 334), since sulfur reduction is often a key objective.
  • Calorific value or other quality parameters of selected fractions where commercial specifications demand them.
  • Near-density material content (δ±0.1 content) at the designated separation density, calculated on the basis specified in GB/T 16417.
  • Size analysis of the sample (GB/T 477 / ISO 1953) to establish the size distribution context.
  • Flotation evaluation of the minus 0.5 mm fraction, including flotation yield, ash of concentrate and tailings, and flotation curves.

Testing Methods

Float-and-Sink Separation

The core procedure uses heavy liquids of controlled density, such as zinc chloride solutions, organic liquid mixtures, or non-toxic inorganic dense liquids. A weighed quantity of each size fraction is introduced into the lowest-density liquid; the floating material is removed, drained, rinsed, dried, and weighed, and the sink portion is transferred successively to liquids of increasing density. This produces a complete set of density fractions with individual yields.

Fraction Quality Analysis

Each density fraction is analyzed for ash (and sulfur where required) using standard furnace methods. The combination of fraction yield and fraction quality provides the mass-quality distribution needed for washability calculations.

Washability Curve Construction

From the float-and-sink data, the laboratory plots the characteristic washability curves:

  • The elementary curve (λ curve), representing the distribution of ash across density layers.
  • The float cumulative curve (β curve), giving cumulative float yield versus cumulative float ash.
  • The sink cumulative curve (θ curve), giving cumulative sink yield versus cumulative sink ash.
  • The density curve (δ curve), relating cumulative float yield to separation density.
  • The near-density curve (ε or δ±0.1 curve), showing the percentage of material within ±0.1 kg/L of the separation density.

Washability Classification

Following GB/T 16417, the δ±0.1 content is used as the classification criterion because it quantifies the amount of material that is difficult for gravity-based processes to separate. With the influence of separation density accounted for, coals are graded as follows:

  • Below 10%: extremely easy to wash.
  • 10% to 20%: easy to wash.
  • 20% to 30%: moderately difficult to wash.
  • 30% to 40%: difficult to wash.
  • Above 40%: extremely difficult to wash.

International evaluations under ISO 7936 and ASTM D4371 apply the same float-and-sink principle, with curve presentation adapted to local design conventions. All testing should be performed by accredited third-party laboratories or in-plant laboratories with verified balances, calibrated density media, and quality-controlled ash determination.

Applications

  • Coal preparation plant design: Washability data form the basis of process flowsheets, separation density selection, and predicted clean coal yield and ash for jig, dense medium vessel, dense medium cyclone, and spiral circuits.
  • Equipment selection: The washability grade determines whether low-precision or high-precision separation (for example, dense medium systems for near-density-rich coals) is technically justified.
  • Mine planning and resource evaluation: Washability testing of seam and borehole samples supports reserve quality models, mine feasibility studies, and decisions on blending or bypassing coal.
  • Plant performance diagnosis: Comparing actual plant results with theoretical washability curves identifies separation inefficiencies, misplaced material, and opportunities for optimization.
  • Trade and specification compliance: Verified yield-quality relationships support commercial negotiations, contract specification setting, and export documentation.
  • Environmental and utilization objectives: Evaluating achievable reductions in ash and sulfur helps meet emissions standards, boiler specifications, and downstream utilization requirements such as coking coal blends and coal-water slurry production.

FAQ

What is the difference between washability testing and routine coal quality analysis?

Routine analysis reports overall properties such as ash, sulfur, and calorific value of a bulk sample. Washability testing goes further by distributing that sample across density fractions, revealing how quality is distributed among particles and therefore how much clean coal can realistically be recovered at a given product ash.

Why is the δ±0.1 content used as the evaluation criterion?

Gravity separation devices separate particles according to density, and material within ±0.1 kg/L of the separation density is the most likely to be misplaced between clean coal and reject. The higher this near-density fraction, the more difficult the separation, which is why GB/T 16417 uses it as the standardized washability index.

What size range of coal can be tested?

Density float-and-sink methods are generally applied to coal between approximately 0.5 mm and 150 mm. Material finer than 0.5 mm is evaluated by flotation testing, because surface forces and slime coatings make heavy-liquid density separation unreliable at fine sizes.

How much sample is required?

Sample mass depends on the top size of the coal and the required precision; larger particle sizes demand substantially greater mass to remain representative. Laboratories typically specify minimum masses consistent with sampling standards such as GB/T 474 and ISO 18283.

Can washability testing predict actual plant results?

Washability curves define the theoretical ceiling of separation performance. Actual plants operate slightly below this ceiling due to imperfection in real equipment, so design engineers apply efficiency factors derived from equipment performance models to convert theoretical curves into predicted plant outcomes.

Which standards govern this testing?

The principal standards are GB/T 16417 and GB/T 478 in China, ISO 7936 internationally for washability evaluation, ASTM D4371 in North America, with supporting methods including GB/T 212/ISO 1171 for ash, GB/T 214/ISO 334 for sulfur, and GB/T 477/ISO 1953 for size analysis.

Why Choose ZKGX?

  • State-of-the-art analytical equipment
  • Highly qualified scientific team
  • Fast turnaround time
  • Competitive pricing